The ACM104 series unbalance correction machine by means of milling is designed and conceived for incorporation with the ACM94 unbalance measuring machine, using its PLC input data as referential for the automatic correction.
Machine parameters:
| Outer rotor diameter | max 60 mm |
| Armature shaft length | max 240 mm |
| Speed of milling spindle | max 5000 rpm |
| Milling spindle motor power | 1.1 kW |
| Mill diameter | Ф20/Ф28 carbide profile cutter |
| Stroke of horizontal slide | max 120 mm |
| Stroke of vertical slide | max 100 mm |
| Mill spindle feed rate | 50/500 mm/min |
| Quill stroke | max 40 mm |
| Quill thrust | max 2200 N |
| Mill spindle feed rate (rapid travel) | 3000/4000 mm/min |
| Noise level | 75 dBa |
| Air pressure supply | min 4 bar |
| Power supply | 3х400V/50Hz |
| Overall dimensions (L/W/H) | 1110/1100/1770 mm |
| Weight | 1000 kg |
