The ACM75 series machine is designed for the undercutting of the micanite insulation between the flat commutator bars of armatures. It is especially suitable for processing of new or rebuilding of old armatures.
Machine parameters:
| Outer rotor diameter | max 74 mm |
| Shaft length | max 300 mm |
| Commutator outer diameter | 40/70 mm |
| Commutator inner diameter | min 14 mm |
| Spindle rotational speed | 6000/15000 rpm |
| Spindle motor power | 0.37 kW |
| Milling tool | Ф12.7 x Ф4.76 x 1.1 mm, Ф8 x Ф2.5 x 1.3 mm или Ф8.4 x Ф3.175 x 1.6 |
| Slide stroke | max 50 mm |
| Slide work stoke | max 40 mm |
| Feed rate | 0,014/5 m/min |
| Vertical spindle travel | max 22 mm |
| Milling depth adjustment | 0.1 mm |
| Tailstock quill stroke | max 42 mm |
| Tailstock thrust | 2200 N |
| Noise level | 75 dBa |
| Air pressure supply | min 5 bar |
| Power supply | 3х400V/50Hz |
| Overall dimensions (L/W/H) | 700/665/1360 mm |
| Weight | 350 kg |
