The ACM73 series hairpin forming machine is designed especially for hairpin coils for DC motor armatures and alternator stators. Raw material is bare or enameled rectangular copper wire, provided on spools of appropriate size. The machine is able to process virtually any hairpin conductor variety without need of specific tooling.
Machine parameters:
| Thickness of wire cross section | 1,1/4 mm |
| Width of wire cross section | 2,5/6,5 mm |
| Wire developed length | 200/1000 mm |
| Width of section | max 65 mm |
| Angle between section ends | max 98° |
| Time for automatic cycle | 2/2.5 s |
| Production | 1400/1800 sections/hour |
| Dereeling unit motor power | 0.12 kW |
| Gearbox ratio | 1:40 |
| Changeover | 5/20 min |
| Air usage | 18 Nm³/h |
| Air pressure supply | min 4 bar |
| Power supply | 3х400V/50Hz |
| Overall dimensions, spool stand included (L/W/H) | 6200/1100/2200 mm |
| Weight | 1200 kg |
